LIST OF OPTIONS AND MODIFICATIONS

Engine Modifications
Porting
250.00
Boyesen Rad Valve ()
179.95
“Service Honda Racing “Billet ignition cover   (Fits CR250 -01)
130.00
“Honda Racing” Billet clutch cover   (Fits CR500 & CR250 87-03)
160.00
Rekluse Z-Start Pro
629.00
Rekluse Z-Start Pro installation
89.00
Our clutch and ignition covers, as well as our rear disk brake guard (pictured in the following pages), are CNC machined from 6061 T-6 billet aluminum and are the highest quality available anywhere. Unlike other aftermarket engine covers these covers are domedfor strength, the bolt mounting flanges use full radiuses for durability and machined to use the stock Honda flat rubber seal.
Suspension Modifications
MX -Tech and Service Honda have joined forces to bring you the finest suspension for your CR500AF. We have thoroughly tested and specifically tuned our suspension to your CR500AF.  When you order your suspension with your bike, we take care of everything. Your bike comes with the suspension installed on the bike, all you do is set the sag and you are ready to ride.
Revalve front and rear with new springs, pistons, valving and oil tailored to your weight, ability, and riding conditions.
775.00
Revalve front and rear with new springs, pistons, valving and oil tailored to your weight, ability, and riding conditions with Enzo fork subtanks
1200.00
Also available is shortening of the suspension for shorter riders or for dirt track or super motard use, this includes springs and valving.
900.00
The Enzo fork subtank system attaches to the fork and acts as a secondary tunable air volume. It has a special valve in the tank that allows the forks to act like they have a very low oil level on low speed or small suspension movements. When the fork moves more rapidly or uses more travel the subtank and the fork reacts as if it has a high oil level. What this results in is a fork that is much more plush on initial travel, yet has much better bottoming resistance.
The Ultimate Speedometer

The Service Honda Ultimate Speedometer includes Speedometer, 2 Resettable Trip Meters, Non Resettable Odometer, Average and Maximum Speed, Resettable Ride Timer, Non Resettable Hour Meter, Bar Graph and Digital Tachometer (works on 2 and 4 stroke engines), Maximum RPM, Adjustable Shift Warning, and 12/24 colck.

With Water Temp.

 

 

 

 

159.00

 

 

 

169.00

UFO Plastic
Front fender
17.95
Rear Fender
29.60
Radiator Shrouds
51.13
Side panels
51.13
Front number plate
21.53
Front disc cover
21.95
Fork slider
34.45
Rear shock mud guard
12.82
Handlebars
Universal Engineering Solex bar (CR High 5000-00-01)
89.95
Universal Engineering Deuce bar (CR High 6000-00-01)
74.95
ProTaper (CR High gold 02-4732, silver 02-4746, black 02-4772)
89.95
Built rubber mount clamp kit for oversized bars (Gray S1024-006G, Red S1024-006R, Gray 10 mm taller S1024-016G, Red 10 mm taller S1024-016R)
49.95
Handlebar Change Labor
70.00
Grips
Pro Taper Half Waffle (black 02-4795)
7.95
Pro Taper Full Waffle (black 02-4790)
7.95
Steering Dampers
Scotts Regular Mount Damper Kit with Damper,ProTaper Bars, and Top Triple clamp. sct,
699.95
Scotts Sub Mount Damper Kit (Requires seperate purchase of O.S. bars.)
529.95
Scotts Regular Mount Steering Damper Kit.
469.95
GPR Steering Damper Sub Mount Kit. (Requires seperate purchase of O.S. bars.) red afx = tr,20-0688, black afx = tr,20-0687, red af = tr, 20-0686, black af = 20-0685
449.99
GPR Steering Damper Kit, Regular Mount for O.S. Bars (Requires seperate purchase of O.S. bars.) red afx = tr,20-0767, black afx = tr, 20-0766, red af = 20-0765, black af = 20-0764.
400.00
GPR Steering Damper Kit, Regular Mount for Std Bars red afx = tr, 20-0733, black afx = tr, 20-0732, red af =20-0731, black af = 20-0730
375.00
Steering damper installation
105.00
Hydraulic Clutch
Magura hydraulic clutch system (M0120493)
249.95
Hydraulic clutch installation
70.00
Graphic Kits
Replacement 2010 250AF Graphics
159.95
Chain and Sprockets
Afam counter shaft sprocket (13t 90-0328,14t 90-0329, 15t 90-0330)
22.99
Afam rear sprocket  (47t 90-0224, 48t 90-0225, 49t 90-0226, 50t 90-0227, 51t 90-0228, 52t 90-0229, 53t 90-0230)
61.49
D.I.D ERT gold mx racing chain (non-“o” ring) (hl,520ert-120l) bad pn
88.22
D.I.D ERV2 gold off road “x” ring racing chain (hl,520erv2-120l) bad pn
194.76
Skid Plates
Works Connection skid plate (34-0833) glide plate style.
69.95
Works Connection skid plate installation
35.00
Works Connection case guard (weld on, works with glide plate)
64.95
Works Connection case guard installation.
35.00

Works Connection full skid plate. wrks, 10-077

199.99
Works Connection full skid plate installation.
89.00
E-Line carbon fiber+kevlar skid plate has wings for additional protection
159.99
E-Line carbon fiber+kevlar skid plate installation
89.00
Triple Clamps
Built Upper
159.95
Built Lower
229.95
Universal Engineering Radius triple clamps (black )
375.00
Exhaust
Carbon Fiber pipe guard
149.95
Pro Circuit spark arrestor (instead of factory sound silencer)
55.00
Replacement Pro Circuit or FMF pipe
229.00
Replacement Pro Circuit or FMF silencer
119.00
Replacement Pro Circuit or FMF spark arrestor
159.00
FMF “Q” series spark arrestor
159.00
Wheels and Hubs
Service Honda billet rear disk guard and rear caliper mount.Makes wheel changes easy and protects the rotor much better.  Production parts will be anodized red or black with a machined wing highlight.
125.00
Excel Pro Series wheel sets (gold/gold, gold/black)
Includes Spline drive spoke nipples,carrier ring set and assembly.
Starting at
1000. 00
Excel Rims with Talon Hub wheel sets. Complete
Starting at
1200 .00
Excel front rim (gold, black, red, silver)
153.48
Excel rear rim (gold, black, red, silver)
168.48
Nipple set (front)
19.78
Nipple set (rear)
38.75
spoke set (one set per wheel required)
84.00
(Wheel modifications will incur a €120.00 per wheel labor charge)
(Tire only modifications will incur a €35.00 per tire labor charge)
Fuel Tanks
Clark   3.0 gallon fuel tank
230.00
Ims 4.0 gallon fuel tank, replaces radiator shrouds. (Ims, 212234-N1)
390.00


Parse error: syntax error, unexpected T_STRING in /home/afbigbor/public_html/bbclone/mark_page.php on line 144